How to Install Window Film

Follow our step-by-step instructions of how to apply static cling and self adhesive privacy film or watch our easy to follow video. Printable instructions are also available.

Download Printable Instructions

How to Install Self Adhesive Window Film - YouTube

How to Install Self Adhesive Window Film

Step 1

Clean and Dry Your Glass Surface

• Using glass cleaner, thoroughly clean your window, door, or sidelight
• Wipe your glass surface dry using paper towels

Surface must be sprayed with water for both static cling and self-adhesive window film

Step 2

Spray Glass Surface with Water

• Spray glass surface with water
• Ensure surface is thoroughly wet

Surface must be sprayed with water for both static cling and self-adhesive window film

Step 3

Remove Backing and Apply to Glass

• Begin to remove window film's protective backing
• Apply window film to glass starting at the top
• Slowly remove backing and smooth film onto the glass with your hand

Tip: Use a piece of tape to help remove the protective backing if backing is semi-transparent or gives you difficulties with peeling off

Step 4

Smooth Out Air Bubbles and Trim Excess

• Using a squeegee, smooth out any air bubbles in the film
• Use a craft knife to trim any excess
• Alternatively, measure and precut window film to desired size

Step 5

Repeat Until Surface is Covered

• Ensure coverage is to your liking
• Repeat steps 3 and 4 until your glass surface is covered